image-paving-stone-and-paving-tiles-in-Toronto

Careful and practical paths covered with paving tiles will decorate any garden and garden. Paving elements are made of heavy concrete by vibrating or vibrating pressing. Vibropressed products are durable, resistant to moisture, frost and non-slip surface.

Paving tiles in Toronto of the cottage plot or territory near the private house is carried out by different schemes. But for beginners who have decided to do without the help of professionals, it is better to use simple laying options. Visual effect can be obtained without complicating the composition of work, a combination of tiles of the same shape and different colors.

Choosing a Tile Paving in Toronto. Scheme

Before you paving the paths in Toronto at a cottage or in the yard of a private home, the following points are determined:

The number of paths and their location. It is generally accepted that a central paved path leading from the gate to the house is mandatory. Its width should be such that it can be easily parted by 2 people. This is 1.0-1.5 m. If there is a car, there is a convenient passage to the canopy or garage.

Its width depends on the width of the car. There is another option – to make two parallel tracks for wheels. It is desirable to pave paths to all places frequented by residents and guests – a gazebo, an artificial reservoir, barbecue area, flower beds and beds.

The width of such trails usually does not exceed 80 cm. In any case, the width of the trail must be adjusted to the size of the tiles so that it does not need to be cut.

Paving material. The thickness of the tiles or paving stones in Toronto is selected depending on the functional purpose of the track. A paving stone is usually called a small pavement tile, the thickness of which is commensurate with its width and length.

Paving elements with a thickness of 60-80 mm are chosen for the lanes on which cars drive and people often walk, and up to 60 mm for decorative garden paths. Strong and non-slip tiles and paving stones of the required thickness can be purchased from the company producing concrete products “Lentehstrom”.

The scheme of laying – “column”, “herringbone”, “bandage”, “fan”, “roundabout”. Any ornaments are laid out from colored elements. It is better to entrust the implementation of complex schemes to professionals.

Before the start of work on the ground make a drawing on millimeter paper, on which sketches of paths in a certain scale are put. When using tiles of the same colour, the total area of the tracks is divided by the area of one tile. The number of elements shall be rounded up to the whole number.

The result obtained is multiplied by an increase coefficient of 1.1-1.15. Stock is needed in case of damage to concrete products during paving or because of the need to trim them. The more complex the contour of the path, the larger the stockpile must be.

Preparation works on the territory before stone paving

Work on the area begins with the contouring of future paths with pegs, between which the twine is stretched. The rope serves not only as a border, but also as a level. For tile laying you will need – shovels (bayonet and scoop), a long level, a rubber hammer, a tool for ramming (vibratory plate), a container for kneading cement and sand mortar, a brush, angle grinder. Further work on the arrangement of flat tracks is carried out in the following order.

A trench is made along the marked contours, the depth of which depends on the thickness of the preparatory layers and the tile itself. Geotextiles are laid on the compacted bottom of the trench to prevent weeds from germinating through the joints between the coating elements.

The thickness of the bearing gravel layer is 5-15 cm, sand layer – 5-10 cm, cement-sand (if it is provided) – 3-5 cm. Tile height for light loaded tracks is up to 6 cm, for loaded tracks – 6-8 cm. For this purpose crushed stone (gravel) with fraction of 5-20 mm and coarse fraction sand are used.

On hard dense soils, no gravel layer is required. For clayey or marshy soils, a crushed stone bearing layer of at least 10 cm thick will be required. Each layer should be embossed after backfilling. It is recommended to use an electric or gasoline compaction machine.

In the preparatory phase, sanding can be finished. But more often, the last layer is the cement-sand mixture. Components are mixed in dry form in the ratio of 1: (6-10). First, sand is poured into the container, cement is added to it and mixed.

In the manufacture of trenches provide a slope for water flow – 5 mm per 1 meter. This slope can be transverse, longitudinal, longitudinal-transverse. Water should flow on the lawn or into the drainage system, but not towards buildings. A cement binder prevents the sand from gradually leaching out. Cement binders are mainly used when constructing heavy traffic lanes.

image-preparation-works-on-the-territory-before-stone-paving

Framing installation

To prevent the tiles from spraying, a fence is arranged for a pathway made of special curbstone or paving stone placed on a rib. The kerb is made hidden or visible, depending on the wish. Framing is mounted until the path is paved. For this purpose:

Next to the path, trenches are made to the required depth.
Tramble the ground.
They make crushed stone falling off.
Place the curb on a layer of cement-sand mortar or fine concrete.

Tile laying

How do you properly conduct the paving process?

Start from visually and functionally important places (porch, house entrance).
Lead the paving process in the direction “from yourself”.
Check the straightness of the seams at every th ree rows.
Place the paving elements with a rubber kiyan (light strokes).

After installing 3-5 m2 of tiles (before compacting them), use a long construction level to control the surface of the coating.

Read our blog!

Paving tiles in Toronto are durable and reliable coating, resistant to temperature fluctuations, humidity and other external factors. It is used at arrangement of pedestrian zones, parking places, platforms, stops. In order to extend the service life of a paving tile and preserve its decorative qualities, it is necessary to avoid factors that prematurely destroy it, to observe the conditions of operation and maintenance.

Basic rules for installation and maintenance of paving tiles in Toronto

The strength and durability of a tile coating can only be guaranteed if a set of conditions are met:

tiles are selected according to the planned loads and climatic conditions;
all technological rules have been observed during installation;
the gutter is properly arranged;
the operating conditions recommended for this material are complied with.

When laying paving tiles in Toronto, care must be taken to ensure that the joints do not get weedy. For this purpose, before installing the tile material on the prepared base put a geotextile, thick polyethylene film, roofing felt. Regular maintenance measures, to which they relate, significantly extend the service life of the tile coating:

Regular preventive cleaning using special products. Able not only to extend the life of the coating, but also to maintain the brightness of the color. Such cleaning is recommended in spring after snow melting and in autumn. Preventive cleaning consists in washing the tiles and cleaning the seams.
Reducing water absorption with water-repellent treatment. Such compositions do not let water inside the products. This is very important, especially for winter time. At negative temperatures, the water that has entered the capillaries of concrete tiles freezes, expands, creates internal pressure and gradually destroys the product from the inside. Water-repellent impregnation, which not only protects the material from moisture, but also makes its color more saturated, retains its characteristics for 10 years. At the end of this period, the treatment should be repeated. Another way to renew the surface of paving tiles is to apply special water-based, alkyd or polyurethane rubber paints. Alkyd dyes harden the surface, while polyurethane paints do not peel off the concrete surface even at -30 °C.
Load control. Significant exceeding of the load levels, e.g. a heavy truck driving over a tile on a pedestrian walkway, leads to material breakage. Small but constant exceeding of the planned loads deforms the paving elements, increases their mobility and impairs the correct water flow.
Control over the use of cleaning agents and tools. Experienced specialists recommend to use for regular maintenance and cleaning of heavy soiling only those chemical agents that are permitted by the regulations on material maintenance. Heavy and sharp tools are not permitted to be used in winter to fight ice and dense snow.

Ways to Care for Paving Tiles

All methods can be divided into three main categories:

Mechanical. It is carried out by means of various tools – shovels, scrapers, spatulas. This method is usually used in winter to clean the surface from ice and snow.
Chemical. All chemical agents are applied only to wet coating. Concentrated chlorine formulations can irreversibly change the colour of products. Therefore it is recommended to try them on a small, unobtrusive area before using the chemical agents.
Wet or dry cleaning. This consists of cleaning the surface from dust, dirt, debris with plastic lint brushes and a pressure jet of water. This is the main method used for regular maintenance. Specialists do not recommend washing the tiles with water supplied at too high a pressure, as a high-pressure jet can destroy the material.

How to properly clear paving tiles in winter from ice and snow.

It is strictly forbidden to use metal-tipped shovels and other similar tools for cleaning tiles in winter. They can destroy the material surface, which is particularly sensitive to mechanical influences at negative temperatures. For cleaning it is recommended to use shovels with wooden and plastic working parts. Paving tiles touch the roadway from ice and snow are cleaned with a brush or a sidewalk sweeper.

To prevent the formation of ice and snow it is recommended to use anti-freeze reagents approved for coloured pavement tiles. Cheap, low-quality anti-freeze reagents change the original color of products for the worse. It will no longer be possible to restore the original decorative appearance of the coating. It is prohibited to sprinkle paths and platforms with salt. It has a destructive effect on the surface and inner structure of the tile, in which salt penetrates with water.

From time to time it is necessary to sprinkle the joints between the tiles with sand and replace damaged elements.

image-how-to-properly-clear-paving-tiles-in-winter

Paving tile care in the summertime

In summer, pavemen t tiles are cleaned of dust, dirt with brushes and water supplied under pressure. The following methods are used to remove complex dirt:

Chewing gum. It can be removed with a special detergent or simply removed with a scraper and the rest can be cleaned with a brush.
Gasoline and oil stains. To remove them, special decomposition agents are used. If gasoline and oil stains are sealed between the joints, the dirty sand is removed and filled with clean sand. Machine oil must be washed immediately as it affects the structure of the pavement tiles. Sand or sawdust should be poured onto the fresh spot and then gently removed.
Tire tracks. They are removed with household detergents dissolved in hot water.
Rust stains. In this case, the surface is cleaned with a concrete surface cleaner containing hydrochloric acid.
Soot. Removed with a mixture of detergent and bleach dissolved in water or soapy water.
Blood, wine. Special bleaching agents are used to combat these hard-to-remove stains, which can have a negative impact on health. Therefore, they are used with latex gloves and protective goggles. After cleaning, the surface is treated with water supplied under heavy pressure.

Make sure that no mortar or concrete mixes get on the tiles. It is practically impossible to clean the coating without damaging the surface. A mechanical method is used to remove such stains. When carrying out construction work after tile laying, it is necessary to protect the tiles with a dense polyethylene film. Tip! Freshly spilled liquids should not be rubbed with a cloth immediately. It is better to use an adsorbent with the following functions: sand, sawdust and even cat filler. Once the adsorbent has absorbed the liquid, it should be gently swept off the surface.

image-paving-tile-care-in-the-summertime

How to remove the pickles from the pavement tiles

The salts are white salt deposits that can appear on the surface of paving elements for several reasons. It is:

Presence of salts in building materials and water used in manufacture of products.
Violation of production technology.
Violation of the rules of storage of products for paving. High humidity in storage areas leads to saturation of products with water and salts dissolved in it.

If there are no white spots on the purchased tiles, they are treated with a weak solution (5%) of acetic, citric or orthophosphoric acids for preventive purposes. After acid treatment, the products are applied hydrophobisator.

Salt plaque not only spoils the appearance of paving elements, but also leads to the gradual destruction of the structure. Therefore, if there are any salts, they must be quickly removed.

How to get rid of the grass between the pavement tiles

If no measures have been taken against weed germination during the installation of the coating, we will have to fight against it every year in summer.

How to remove grass between paving tiles are the main ways:

Pull out weeds with root, cut as low as possible with scissors or other special tools.
Pour boiling water over the seams. Alternatively, burn out with a blowtorch. But in the latter case, the surface of coloured tiles that are not designed for high temperatures can suffer.
Rinsing the seams with water supplied under pressure. Liquid rinses out seeds caught between tile elements.
In case of strong spread of weeds, herbicides are used. When using them, observe the specified dosages, otherwise you can cause damage to useful plants planted nearby.

The surface of a tile coating may be negatively affected by biologically active factors, such as moss and fungus. They gradually destroy the artificial stone and reduce its service life.

How to remove moss and fungus from paving tiles:

to mechanically remove moss, fungus and lichen;
moisten the surface;
wipe the surface witch chlorine-containing substances dissolved in water;
rinse the surface with water.

Preventive maintenance measures for tile coating include treatment with lawn solutions containing iron sulphates and ammonium. They prevent the appearance of moss, lichen and fungus.

Regular tile maintenance does not require any special time and financial expenditures. However, with the help of simple measures it is possible to significantly extend the working period of a paving tile and preserve its original appearance as long as possible.

image-Stonework-Preparation-and-Installation

People who are not familiar with the rules of stonework in Toronto are faced with the fact that the finishing material, after holding on to the wall for some time, gradually begins to collapse. Usually the stone is applied on the glue of low quality, although often incorrectly prepared work surface leads to a collapse of the cladding.

Methods of installation of a Stonework in Toronto – 2 variants

The laying of decorative stone is performed with the use of auxiliary materials, which are selected taking into account the planned method of installation. The tiles can be fixed on the wall with the use of jointing technique or seamless method: If the material is mounted with an expansion, then simultaneously with the tile is purchased the intended for its execution solution and a special dye. The latter usually has a contrasting tone or color corresponding to the tile shade.

If the decision is made to lay the stone without using the technique of expansion, then in addition to finishing, in the shop, you need to buy only the manufacturer’s recommended adhesive and, if necessary, hydrophobic composition.

A decorative stone brick in a seamless way is easier and faster than with stitching. Finishing material should be laid tightly, which will allow you to get a virtually monolithic surface. The main thing in the process of installation – time to remove excess adhesive that protrude in the sealing of the finish, otherwise you will have to suffer later.

Dried tile glue with decorative finishing help to remove special acid-containing compositions. A greater effect can be achieved if the cleaner was released by the same manufacturer as the glue.

Despite the difficulty of laying a decorative stone with an embossing, this method is used quite often – it looks more spectacular.

They fix the decorative stone on the wall at a certain distance from each other. A perfect joint can be achieved by placing the same pieces of plasterboard or chipboard between the rows of stones. After the installation of the entire finishing material, we wait for the glue to dry and then perform the jointing.

Too wide a seam can spoil the overall impression of the decoration, which is especially noticeable if the tiles are used to create a composition with the same pattern in the apartment.

Stonework in Toronto is our company’s best offer!

image-methods-of-installation-of-a-stonework

Stonework in Toronto : types of decorative material – sandstone, marble, limestone

For interior decoration of residential walls, stones are used, made either on cement mortar or on plaster. The first ones are chosen for facing surfaces in rooms with a high level of humidity, for example, in the kitchen and in the bathroom. The second type of products is afraid of water, so they are used to decorate walls in the living room, bedrooms and other rooms of the house / apartment. Finished products most often imitate brick and slate.

And if the brick looks perfect in the interior of corridors, bedrooms and balconies, then due to the variety of textures of oil shale it is possible to create bright and original compositions on the walls of living rooms and hallways. As for natural materials, because of their high cost, finishing with their use is rare. Meanwhile, the following types of decorative stones have become widespread:

sandstone – has three shades, has a granular structure;
marble – has a wide color palette and different texture;
limestone – differs in structure, size and color shades.

The laying of natural decorative stone on the walls has its own peculiarities, but does not differ much from the installation of artificial products. The main thing in both cases is to properly prepare the surface.

Installation of a stonework in Toronto on the walls has its own peculiarities, but does not differ much from the installation of artificial products. The main thing in both cases is to properly prepare the surface.

Installation of a stonework in Toronto

We recommend that you carefully process the stonework in Toronto before laying them on the walls. The surface to be trimmed may have different coatings, so it is prepared differently: If you want to put the tiles on the plastered walls, the places with obvious defects are plastered again. Having got rid of convexities and voids in this way, the wall is treated with a dry brush, wetted with water and dried.

We prepare very rough surfaces in a similar way. We finish the process with priming works. As a primer can be used liquid adhesive mixture. After that, after 2-3 hours, we begin to lay tiles. The wooden working surface is preinsulated using pergamine sheets, the laying of which begins from the bottom upwards (with horizontal overlap – 15 cm, vertical overlap – 5 cm). Over the vapour barrier we equip the wire mesh.

We apply a layer of cement mortar to the wire mesh, and before the surface dries out we use a dry hard brush to improve the adhesive properties of both materials. Preparation of the metal wall for decorative tiles follows the same principle as for wooden surfaces. The difference is that in the first case the mesh is fixed by nails with small flat bars or by stapler, while here the screws are more appropriate.

We remove defects on stone, concrete and brick walls with the help of puttying. If there are greasy spots on the surface, we remove them with special degreasers. For preventive purposes, we reinforce the wall, apply cement mortar over it.

If the stone surface has been painted, then before laying the tiles it is treated with a sandblasting machine. Afterwards, we install the plastering grid and apply a cement layer. If it is planned to lay the decorative stone on the gypsum plasterboard, we apply a waterproofing composition beforehand. Installation is carried out with the use of a special adhesive, as a finishing material we recommend to choose light and thin types of products (heavy stone should be laid on a double layer of gypsum plasterboard).

image-installation-of-a-stonework-in-toronto

Read our blog!

image-best-landscaping-company-in-north-york

The best landscaping company in East York – aims to transform the surrounding area, the contemplatio are one of the main landscaping works in the area.

Important indicators that the best landscaping company in East York is taking into account

Before landscaping in North York, it is important to find out as much as possible about the area’s climate, soil conditions, existing plantings and the crops to be planted.

The main climatic factor that determines the choice of plants and the nature of landscaping in general is temperature, since each plant has its own optimal temperature limits for normal growth.

The best landscaping company in York will help you turn all your plans into reality!

Another important indicator when drawing up a green area plan is the degree of illumination of the area as a whole and its individual parts. For uniform landscaping, you need to select the right light-loving and shade loving plants.

It is necessary to find out the fertility of the soil, this is the indicator that determines the quality of supply of planted plant crops with nutrients, water and air. Saturation with mineral elements, acidity, mechanical composition and so on – these are the indicators that determine the quality of soil. The best soil for plants is considered to be loamy and sandy loam.

Ground humidity is a very important indicator. Water is a necessary material for plant growth and its main component. Moisture helps to dissolve the minerals needed to feed the plants and to protect them from overheating.

The main supplier of moisture is precipitation, the average rate of which is taken into account when planning a green area.

Best Landscaping company – your step to a successful project!

Several key milestones in the best landscaping company in York

1. Dendrological plan

Landscaping in York begins with the drawing of an arboretum – a drawing on which the boundaries of the site, the buildings located on it, lines of communication, are applied to existing trees and shrubs, and then planned plantings.

Before the beginning of landscaping must take into account the location of the site relative to the sides of the world, on an open or sheltered from the wind is an area. Landscaping is done taking into account the topography of the area, as it plays a decisive role in decorating the garden space.

All these factors influence the selection of plantings for subsequent plantings. Experienced landscaping specialists in North York know very well how to emphasize the uniqueness of the natural terrain.

2. Planting decorative plants

The next important stage will be the selection and further planting of plants. The whole variety of plant forms is divided into several groups: trees (plants with a single trunk), shrubs (plants with several tree trunks), herbaceous (perennial and annual plants), they can also be divided into deciduous and evergreen.

3. Greening with evergreen plants

Coniferous plants stand out for their special beauty at any time of year, due to their variety of shapes, coloration of needles and trunks, these plants are indispensable for the decoration of any garden.

4. Planting perennial plants

Those parts of the garden that are free from trees and shrubs are filled with herbaceous plants, they have a fairly large group. Grass plants are divided into perennials, two-year-old and annual plants. For the design of columns and arches, curly green areas are used.

5. Lawn building

The final final stage in the landscaping of the North York site is sowing or laying the lawn. It is very important in the design of the territory to maintain a uniform style, then the site will look harmonious, cozy, comfortable and delight its owners all year round.

Best Landscaping company – a great choice for the homeowner!

Landscape design in East York

Landscaping Company in East York “Captain Handy” provides a full range of landscape design services in York. Our team includes specialists such as: landscape architect, landscape designer, sculptors, engineering communications specialist, dendrologist, florist, stone specialists, three work teams for landscape and landscaping in North York.

The works we perform: design, landscaping and landscaping, creation of decorative water reservoirs, installation of engineering communications, paving, as well as further maintenance of the territory.

We are always glad to come to the aid and fulfill any task set by the most demanding client. We provide services throughout Ontario. We operate in North York, East York, York, Toronto, Bolton, Aurora, etc.

Works which we carry out: designing, an accomplishment and gardening, creation of decorative reservoirs, watering, installation of engineering communications, paving, and also the further maintenance of territory.

We love our work, and you will be sure of it! A best landscaping company is an excellent, well-thought-out choice.

Landscape work in York

One of the most interesting and important stages of landscaping is landscape work in York.

Preliminary on your site should be performed the necessary engineering and construction work in accordance with the developed project: the creation of drainage system of the site, vertical layout of the area, constructed water bodies, prepared the soil for the growth of plants in accordance with the requirements of plants, etc..

Landscape in North York – planting plantations on the site (trees, shrubs, lawns, perennials, annuals, etc.), which form and decorate your garden. When planting trees and shrubs, lawns, perennials, annuals, etc., which form and decorate your garden, it is very important to imagine the appearance of your garden after a few years.

Otherwise, the same little tree planted to admire her in front of the window, after 10-15 years will grow into a huge green (or blue) beauty, which completely block the view from the window and shade the room in the house.

Another situation is also common: a beautiful little juniper planted next to the track (20-30 cm in diameter) gradually grows to 3-5 meters and completely covers the surface of the track. An important aspect in the selection of planting material is knowledge of plant varieties and the country of origin of the planting material.

For example, if you want to see annual early spring flowering of the flower buds, plant the ovata flower buds; in other species of flower buds, the flower buds almost freeze above the snow cover level every year.

Many dendrologists are very skeptical about plants grown in the Benelux countries, because the acclimation of such plants is somewhat difficult. Do the right thing with Captain Handy, a best landscaping company.

However, it is possible to ask for help from an experienced landscape designer in East York with a good knowledge of dendrology, who will be able to make the selection of plant material for the creation of a garden with all its features. The design of three-dimensional compositions of plants should be based on the laws and stylistics of landscape design in North York, while taking into account the differences in environmental requirements of plants by soil, lighting, hydrological regime, etc. It is also necessary to take into account differences of plants in growth strength, seasonal ornamentally.

It is desirable to think over the winter appearance of the garden: at this time of year in the foreground are coniferous trees and shrubs, as well as the skeletons of trees and shrubs and their bark, fruits.

Almost every landscape designer in North York has his or her own techniques and secrets for creating a beautiful garden.

Someone prefers bouquet planting, someone does not think of a garden without lighting, someone planted hedges in all areas. It’s a matter of personal taste and preference. Our many years of experience have shown that the best results are obtained through close collaboration between the client and an experienced landscape designer in East York.

In conclusion, we would like to note that landscaping, despite some difficulties, is an extremely interesting and exciting process. The result is a beautiful and harmonious garden, to which you always want to return. Try it, plant it and you will succeed.

And if you are in any doubt, please contact us. We will certainly develop and implement a landscape design project for your garden in York!

Landscape design companies in North York

The best solution would be to come to us. We are a landscaping company, offering design in North York and the area partially or “turnkey”. Describe us a picture of an ideal garden or a whole plot, and we will make it a reality!

Landscape design in York consists of several stages:

Conversation with the customer – what he wants to see on the site, which plants he prefers, whether there will be water bodies;
A visit by our staff to the site to assess the soil condition, the need for drainage and more;
Selection of all planting materials – bushes, trees, flowers;
Works on creation of a given landscape;
Delivery of work to the customer.

With us all quickly and simply. Each of our work is a separate story, which was written only for our customer. All our landscape projects in East York are different, we try to offer each time something new and original. We use in design, as typical garden plants, and more rare copies.

Our landscaping company in East York is your dream!

By contacting us, you will learn what high service and professionalism are. In our team there are real masters of their craft – designers and designers who strive to make not just a beautiful landscape project, but a real masterpiece, every time new and unique. Using different plants, we create uniquely beautiful landscape projects in York.

Properly designed and laid out irrigation of the soil is also not in last place. In a word, we offer a variety of landscape projects in different styles, approaching this issue thoroughly and from all sides. Therefore, with us quality, profitable and most importantly, beautiful!

Read our blog!

Each owner of a summer house is trying to make it more beautiful and well-groomed, but many mistakenly believe that the landscape design in Brampton on the six weaving – is something of a fantasy.

For the design of landscape design will hire a professional, any very impressive amount of money ready to make from your dacha put on a garden masterpiece, decorating it with alpine slides, waterfalls, gazebos, exotic plants and other fruits of innovation design ideas. But the fact is that most people can not afford the services of such an expert.

Create landscaping in Brampton with your own hands, show your imagination by taking the best from unique author’s ideas, which are filled with many specialized sites. Embody in life your most daring and bright ideas, trust your taste and intuition, create a landscape that you like.

Landscaping near me – Captain Handy.

Landscaping contractors are companies that deal with all kinds of landscaping services related to landscape design and improvement of both the backyard and the front yard.

Creating a landscape design is not easy work. The main condition – the desire, patience and a little imagination, and then the territory of your country house will look like a paradise, beautiful, stylish and harmonious. And you will enjoy the fruits of your creativity, because the creation of beauty is a huge satisfaction.

Good Landscaping Contractors – the experts who will make you happy!

Yard design in Brampton

Begin the development of the design of the yard of a private house should c routine, at first glance, cases: land works and planning. First of all, it is necessary to think over the placement of all elements. Zoning under the 3D-project (at least under the sketch created taking into account the area of a site and quality of illumination) will be optimum.

A tight and cool corner is an ideal place for a pergola in Brampton or a barbecue. The summer heat will not prevent you from enjoying a family holiday outdoors. On the title side you can have parties, a swimming pool and light figures are appropriate.

As a result, Brampton yard design elements such as alpine slides and rosaries (analogues for the plains) should be placed on the sunny side. Take care of a drainage mixture of sand and gravel in advance, as normal soil is not suitable for mountain plants.

Modern Patio in Brampton

An irreplaceable element of modern landscaping in Br ampton – a fenced area near a holiday home. For many it is a novelty, but the custom to equip the courtyard dates back to the ancient times. The yard design in Brampton with a patio is typical for Spanish-Moorish architecture. Usual for us flower beds are the analogue of the Moorish florist, which differs significantly from the “conservative” English lawn. What can be used to decorate a patio?

The coffee table, often made of vine, is a central element that can be replaced with a wooden dining table.
The design of the courtyard of the house in the Provence style is hard to imagine without arches decorated with miniature roses.
Garden figures. Ceramic dwarfs, kittens and hedgehogs are already classics that fill the atmosphere with a special coziness.
You can give originality to them by using topiaries with dried flowers, coffee beans, nuts and cinnamon – sticks.

Landscaping Brampton – a synthesis of tradition and European trends. Flowers, lighting fixtures, ponds and lanterns – surround yourself and your loved ones with what you love, and a great mood is ensured!

Are landscaping companies essential in Ontario

Speaking of a private house plot, many imagine a garden or garden. But it doesn’t have to be that way. Today, new momentum is gaining momentum in the arrangement of the exterior of a private home in Brampton under the recreation area. We are already tired at work, so when you return home, you should allow yourself to relax and not run to dig beds or clean weeds. In this article Captain Handy tells you how to choose the Landscaping contractors for your private home.

Be prepared for the fact that the result of the landscaping contractors will be different from what you imagined. This is a common problem for customers, but no one is immune to it, because what you imagined mentally can not always be correctly understood by the contractor and not always correctly conveyed to the workers.

That would not fall for the bad landscaping contractors, ask them for examples of work or a website where a list of services is presented. According to the list of services you can understand how qualified the specialists are. If they have a narrow list of services – this may indicate that the company has just created and professionals have little experience and provide a small number of services.

If you’ve been told that they can’t realize your backyard vision, it doesn’t mean that the landscaping contractors are bad, maybe your idea just isn’t possible or the landscaping contractors just don’t have enough of the right equipment or tools. You can always find a compromise, communicating with a contractor hasn’t hurt anyone yet.

Landscaping contractors – should be your friends – if they tell you little about the work ahead and do not offer what and how to better it should already alert you.

Landscaping contractors will not always agree with your vision of those or other planned works, because thanks to their experience they understand that your desire will not always look neat or be structurally unacceptable.

Landscaping near me – Captain Handy

Original yard design of a private house in Brampton: a recreation area or a garden.

Of course, vegetables from a bed it is delicious, useful and always fresh, and do not run to the store. But it’s not always worth planting all the free honeycombs with them. You can take a small area under a vegetable garden, and the rest of the space to use for a different purpose.

Why don’t you “wrap up” your yard? Make it so attractive and comfortable that those passing by also want to look at the light? We suggest that you take a look at some of the landscaping companies essential in Ontario

Landscaping near me Brampton

Captain Handy is the best landscaping contractor in Brampton and throughout the GTA. Our company provides absolutely any kind of landscaping services. We do all kinds of work in such areas as:

hire a landscaper;
tree services;
retaining walls;
landscaping job;
lawn maintenance;
garden landscape;
and others.

A small yard of a private house is not yet a sentence for creating functional and beautiful design. As the size of the plot does not always allow for a terrace for relaxation or a large gazebo, you can create a small secluded corner with a table and chairs under a tree or by tall bushes that give shade. Hang garlands on the branches, homemade bottle lamps and a cachepot with flowers that will bring even more comfort.

Land scaping near me Brampton is quite easy to do with your own hands, as old garden tools, wheelbarrows, flowerpots and almost any outdated items that can be turned into decor are ideal for creating a style.

The paths in the landscape design of the private home in the recommended finish with natural stone, tiles or pebbles. You can also decorate the country courtyard with flowering plants without fear of “overdoing it”.

Read our blog!

image-build-a-veranda-with-your-own-hands

The veranda in Bolton is a stylish and functional decoration of the country estate. But if the gazebo is a free-standing structure that can be used in the summer, the veranda in Markham is an attached room to the house, with a roof, walls and is designed for year-round use. Warm veranda in York can serve as a corridor, entrance hall or rest room, greenhouse, winter garden, it can even accommodate a swimming pool.

What’s the difference between a veranda in North York and a terrace? These concepts are often confused, although they have a constructive and visual difference. With a roof and walls, that’s the difference between a veranda and a terrace and a porch.

The veranda is envisaged at the stage of construction of the house, but more often it is completed already during the operation. That’s why many people are interested in how to build a veranda in Aurora with their own hands. Below is a step-by-step instruction on how to build a veranda to a private house.

Build a veranda in Bolton

Any construction in Scarborough starts with project development.

Summarizing the experience of building verandas in Toronto, we can note that they differ in the following parameters:

Location (adjoining the house):

Corner veranda
End veranda
Facade veranda

Degree of closure:

Open veranda
Closed veranda

By installing the veranda sliding doors, you can transform a closed veranda into an open one.

It’s a design feature:

Built-in veranda (built together with the house, has a common foundation).
Adjoined (built as needed, has its own foundation).

The shape of the veranda:

The popular form is a rectangle
Round veranda
Multiangle

The main purpose of the veranda in Richmond hill is to make the house or summer cottage more spacious and decorate the building. Addition of a veranda in GTA performs a purely utilitarian function – the insulation of the house. Therefore, it is logical to ask how to add a veranda to the house correctly.

Despite the fact that the veranda – a summer construction, its construction provides for a number of rules.

Which is part of the veranda construction project:

location of the veranda. The main options are marked above. It is important that the annex is an extension of the house, representing a common architectural ensemble with it.
entrance place to the veranda. The entrance can be arranged from the street, from one of the rooms or it can be through, through the street to the house;
the place of installation of the door. Entrance doors to the veranda and the house is undesirable to place against each other, otherwise drafts cannot be avoided;
the size of the veranda in the house. The length of the veranda is usually the length of the wall along which it is erected. The width is from 2.5 to 7 m. Here it is important that the size of the veranda proportionally corresponds to the size of the house.

How to add a veranda to a wooden house in Toronto

Any addition to the house made of wood is made after shrinking the structure. A house made of timber or log gives shrinkage for a certain period (the most active first 2-3 years). To avoid distortion of the walls, you need to wait for this period, or think about connecting to the house, allowing the framework to play.

Tools and materials for veranda construction in Vaughan

The tool depends on what material will be used to build the extension in Vaughan. For wood you need: a hacksaw, a screwdriver, a hammer and an axe, a sledgehammer, a tape measure, a plummet, a level (construction and water), a corner, a cord for marking, a shovel. For the metal frame you will need an additional grinder tool and a welding machine.

Material

The (budget) version of the veranda is a metal frame covered with plywood, OSB plates or plastic wagon.

A more presentable look is a veranda made of bricks, natural stone or wood. Here it is important that the material of the annex matches the material from which the house, summer cottage is built or harmonizes (blends) with them.

The construction of a wooden veranda in Bolton will require: lumber (log or beam, board, rail), fasteners (elements), protective mortars for wood, crushed stone, concrete, bitumen, olive or roofing material, window and door systems.

For verandas with metal frame: lumber will replace metal corners and steel profile, solutions for metal processing will be added, and otherwise the materials will be the same.

The polycarbonate veranda is well-proven to allow you to freely admire the surrounding landscape. In addition, polycarbonate retains heat well, lets in light, can be used for walls and roofing. Plus, the cost of the material is quite adequate.

Cellular polycarbonate with wall thickness of 14-18 mm is used.

Preparing to build in Aurora

Construction of the veranda in Aurora begins with the preparation of the site. The part of the plot allocated for the veranda becomes a construction site. Before the work begins it is necessary:

remove the visor above the entrance;
remove the porch;
clear the area of greenery and debris;
remove part of the turf;
think over the place of laying of building materials and construction waste

Read our blog!

Naturally, landscaping in Ontario of the territory is most correct to perform with the direct participation of a professional who has the necessary experience and knowledge base. His services include the necessary advice and assistance in the work itself.

But it’s not always possible to have a specialist and you have to try out the role of a landscape designer in Ontario yourself.

If there is a great desire to try something on their own, why not? In general, if the fantasy is all right, then an independent construction of the garden in Ontario will not be such a big problem.

First of all, it is necessary to go around the whole site, assessing it for yourself. Determine which places to emphasize and which to hide. Which part of the territory beckons to you, and how to the contrary – makes you leave faster.

It is also worth paying attention to where the sunnier zone is and where the shade is. This factor can play a decisive role in the arrangement of the recreation area.

While walking around the territory of the future garden, take a close look at all possible details, mentally lay out the tracks of the desired material, choose the most successful way. Take a walk through the paths to find the most comfortable areas on which a proposed bench can be placed.

Landscaping in Ontario – contact our team!

Necessary details for a landscaping in Ontario

In order to approximate the general view of the area, you need to at least schematically capture it on paper. This plan should contain all the desired buildings, decoration elements, paths in Ontario, sites and distribution to the desired areas.

If you plan directly on the site, ordinary sand will be your loyal assistant. Just emboss it on the proposed places of future paths, mark the boundaries between zones and the proposed channel of a dry stream.

If you already have your own special area in the garden where you are used to dinner, just give it some novelty. Refresh your trees, put in new exterior items, and make a cobblestone walkway in Ontario. This will not only breathe new life into the site, but also make it more cozy and, of course, beautiful.

If you want to grow on your lawn, you should carefully inspect the area for any excess moisture. After all, if it is present, you will have to install an additional drainage system so that the lawn simply does not rot.

If there is any doubt about the quality of the soil, it is better to replace it with a new, more fertilized.

And yet to start site development is only when there is at least a basic knowledge of landscape design. Otherwise, the money spent on the landscaping in Ontario will be wasted.

Custom types of sites – advice from a landscaping in Ontario

Unfortunately, it is not always the right shape and size for the site.

The most common problem for a designer planning a site in Ontario is the non-standard shape of the site: too narrow or long.

Often there are cases when the width of such an area reaches only a couple of meters, but the length of 10 times more.

Landscaping a plot of land in Ontario is difficult, but it is workable. And the result is entirely up to you.

An Ontario garden from a non-standard shape will look beautiful and harmonious only with certain tricks that will help smooth out most of the disadvantages of the area.

Landscape design in Ontario

Setting up a site in Ontario should start directly from the zoning. You should divide the entire garden area into different separate zones, some of which can be set aside for plants and others for sites.

It is good if the elements are not protected from each other by walls that prevent you from looking behind the garden. The open space visually extends the area.

It is also much more pleasant if the different areas are different from each other. For example coating, plants, colors or different levels of sites.

For example, you can place a decorative lawn in the rest area, but pour a small stone under the trees. You can also beautifully beat the reception of sites of different levels: Lift up the furthest corner of the site slightly, thus visually softening the length of the garden.

The uneven size of the areas also gives the area some dynamics. Expansion can be achieved by using different edges, plant hedges and cobbled paths in Ontario.

If we talk about the walkways, they should not be straight under any conditions. Winding multi-coloured paths will add a certain variety to the overall concept of the garden. Vegetation of different types at the edges of the section will only have a positive effect on it.

A very important element for this type of site is the emphasis on individual elements. There should be at least three main points of attraction for the eye. These can be shrubs of unusual color or shape, benches or even sculptures.

Planting trees of different sizes also has a good visual effect. Just do not plant them too long in rows.

Read our blog!

Driveways and landscaping in East York – a service of our company, which will certainly be useful to you!

If people or cars often move between points A and B, there must be a hard cover between these points. The road is designed for pedestrians and two-wheelers, while the driveways in North York is designed for four-wheelers. At the moment, there are so many types of road surfaces on sale that it is difficult to make a choice.

The material, which would be in everything better than others, probably does not exist, but for each specific situation, some material will be suitable, and some will not be appropriate. So as not to get in the way you need to scroll through the answers to the questions below.

First, should the garden path be purely multifunctional, without any claim to decoration? This level includes paths in the garden or orchard – in this situation you can use tamped earth or cheap material such as gravel, crushed bark or concrete. Grass paths in East York are not suitable for constant or active movement – the grass is trampled, asks for constant cutting, and on this garden path in North York is unpleasant to walk in wet weather.

Driveways in East York

A garden path or driveways in East York almost always makes not only a purely utilitarian, but also a decorative function. Check-in is the first thing your guests will see, and garden paths often visually define the structure of the site. The following question is related to the price – how much can you afford to pay for a decorative coating?

Natural stone slabs are very beautiful, but they are not cheap and difficult to install. Concrete and gravel are even cheaper, but the concrete track looks monotonous, and gravel often spread from under the feet to the lawn and flowerbeds. At the moment, artificial stone slabs are more popular – they are relatively inexpensive and are very diverse in terms of coloring, size, shape and surface appearance.

Another factor to consider is the geometry of the garden path. On a loosely laid out plot, curved paths are usually more presentable than straight paths, but their curves should be smooth. The geometry of a garden path can influence the choice of surface – a curved path can simply be made of gravel, crushed bark or irregularly shaped stones, and a little more difficult – from blocks for paving, brick or concrete.

But building a garden path in York from the hugely sized slabs you’ll have to pound will probably be hard work. A few rules when building a garden path

The track should be quite wide – not more than 60 cm, but even better – 90 cm for a medium-sized garden. To prevent water from stagnating on the garden path after the rain, it must have a cross slope (more than 1 cm per 1 m). Small spots on the road surface should be avoided: frozen puddles are very unsafe in winter. If the garden path in York is adjacent to the wall of a house, its surface must be at least 15 cm below the waterproofing layer. And, after all, if the planned access road exits on the highway, don’t forget to get a building permit for it.

Construction of a garden path

The construction of a garden path:

1 – Lawn edge. The path should be approximately 3 cm below the surface of the lawn so that the mower does not touch the surface when mowing. To make mowing lawn edges easier, throw an unseeded strip of land between the lawn and the garden path.
2 – Rigid covering. Place slabs, blocks, etc. on top of the foundation on a mortar. A coating of this kind is strong and rigid, which is especially important for the access road on which the car is usually left.
3 – Not a rigid coating. Bricks or blocks are pressed tightly into the sand, slots are covered with sand. Advantage of such covering consists in ability to replace a covering on small sites.
4 – Edging. Krebs can be arranged using various methods. When using gravel, crushed bark, bricks or blocks of curbs, it is necessary that the coating material does not move to the soil along the garden path. It is better to pave the kerb even with a hard surface, because in this case, on the contrary, it will prevent the ground from the beds and beds on the track.
5 – Foundation. The secret to the durability of a garden path is a solid foundation. The strength and structure of the foundation is determined by the load on the road, the type of soil and the material chosen to paving the paths.
The soil under the foundation must be perfectly tamped. An ordinary foundation under a rigid coating is a layer of compacted sand 5 cm wide, laid over a layer of crushed stone or broken bricks 5-10 cm wide. A concrete foundation may be required for the driveways in East York. An ordinary foundation under a non-rigid coating is a layer of compacted sand 5 cm wide.

Material for garden paths. Garden path made of bricks in North York

The brick is a good material for a garden path on a plot of land in North York with a classic layout. Bricks can be laid on a rib or flat, and used brick lanes have the appeal of antiquity. We would like to warn you: only special pavement bricks should be used for paving paths in East York, because ordinary bricks will crumble rapidly from rain and frost, and dense facing bricks in wet weather becomes slippery.

Bricks, as well as blocks for paving paths in York, usually do not bind to each other, so that concrete or lime mortar when laying will not be useful, although a hard base is needed. Lay bricks can be different patterns, and since each brick weighs relatively little, to make such a garden path under the force of even not very young and at a physical level is not completely strong man. A brick has flaws – it is expensive, and paving a huge area takes a long time. So that the bricks are not covered by mosses and water plants, treat the garden path with a water plant remedy.

Stone garden path in York

Once upon a time, natural stone was actually the only material for building a decorative pathway in North York rather than a multifunctional one. Sandstone, slate and limestone slabs were used for this purpose. But the era of natural stone has remained in the past, because prices for it have risen greatly, and laying it is difficult. The thickness of the stone slabs varies, and their cutting to the size of a garden path requires special tools. Only for a few home owners is natural stone still the only material for the front walkway, but most people enjoy even cheaper and more diverse concrete or artificial stone slabs.

Dimensional slabs are laid in the same way as standard road slabs. Small stone (usually granite) bars, which have been used extensively in road construction, are called paving stones. You can buy a used paving stone and use it for decorative inserts in the road surface. Paving stones in North York are laid in the same way as cobblestones.

Garden path made of asphalt in East York

Asphalt – a favorite material for the arrangement of driveways in East York : reinforced crushed stone coating, pebbles, etc. It is a stone crumb bound with tar or bitumen. Asphalt is laid hot, and this work is best left to the experts. Approach the contractor’s choice of contractor.

If it is necessary to renew the driveways from asphalt in North York to the concrete base, smear the surface with bitumen emulsion and leave it to thicken for 20 minutes. Then place a layer of cool asphalt. It is sold in bags and is available in reddish, greenish or dark colors.

Even out the asphalt with a rake (layer thickness 2.5 cm), and then carefully compacted with a dark roller. During operation, wet the roller on a daily basis. To achieve a speckled effect, sprinkle the surface of the drive with white stone chips. Then place a layer of cool asphalt.

It is sold in bags and is available in reddish, greenish or dark colors. Even out the asphalt with a rake (layer thickness 2.5 cm), and then carefully compacted with a dark roller. During operation, wet the roller on a daily basis. To achieve a speckled effect, sprinkle the surface of the driveways in North York with white stone chips.

Cobblestone garden path in North York

Cobblestones are called rounded natural stones with a cross of over 2.5 cm. Decorative bridge of cobblestones may look very beautiful, but it is not suitable for the driveways in North York , and the use of this material is strictly limited. The fact is that walking on the cobblestone is awkward, and old people and children – even unsafe. It is ideal to lay out from a cobblestone geometrical inserts (square, round or rectangular) on a huge area of any monotonous covering. Prepare a rigid foundation, and put a layer of concrete on top of it.

Cobblestone very pressed into the concrete, placing the stones close to each other and pressing them down with a board so that they are all at the same level. The cobblestone should protrude 1.5-2.5 cm out of the concrete. There are no conventional methods for laying the cobblestones – do not try to make a stiff coating by placing the cobblestone on the sand.

Garden path: a mosaic in North York

Putting up road boards is not an easy task, and usually you have to withstand straight stripes. Mosaic tiles in North York are smaller and a random sketch does not ask for precision. Broken concrete slabs can also be used instead of finished tiles, but even better to use pieces of natural stone 4-5 cm wide. If you take the material out by transport, it can be cheap.

The method of laying only a few details is different from that of the slabs. Having prepared a pillow, at first lay out stones of bigger size at the edge of a path. Now lay the remaining large pieces in the middle and fill the voids with smaller stones. Push the stones into the sand, making sure any of them sit tight and do not protrude over the adjacent stones. At the end fill the slots with hard material (1 part of cement on 4 parts of sand with very little water).

Garden path made of wood and bark in East York

In certain situations, a garden path made of wood in North York can be very nice – nothing will harmonize with a semi-wild garden, especially if the place between rounds is covered with crushed bark. The wood can rot, so the saws need to be treated with an antiseptic and placed on a cushion of sand sprinkled on top of the perforated polyethylene film. From time to time it is advisable to use iron and hydrogen sleepers as the material for the garden path, but in hot weather they can drip creosote, which will not slow down the impact on your floors.

In recent years, it has become popular to make paths from crushed bark in parks. Such a garden path is a gentle walk, it looks natural, but this material of the road, certainly asks for a curb at the edge of the path and constant sprinkling once in a couple of years.

Concrete garden path in North York. Concrete driveways in North York

Many do not like concrete because of its simplicity, but it remains a popular material for both garden paths and concrete driveways in North York. It is durable, quite inexpensive, suitable for the creation of paths at least some form and, if it is correctly cast, it does not ask for care. Concrete does not necessarily look cheerful – in a mortar can be added to the dye or with a hard brush to apply to the surface has not yet grabbed the sketch, making it not only more pretty, and the least slippery.

The main discrepancy is that it takes a long time to prepare the pillow for the path, and the pouring process is heavy and asks for attention and certain abilities. If you need to concrete a small area, you can knead the concrete manually, but at a huge scale even better to rent a concrete mixer or buy a ready-made mortar. Either way, you will need help as you need to work fast.

Garden path made of gravel , gravel driveways In East York

Gravel is the cheapest material for a gravel driveways in East York. It is widely used when it is necessary to lay a covering on a large area. A distinction is made between actually gravel (crushed stone from quarries) and pebbles (small stones ground with water). Cheapness is not the only advantage of this material. From gravel it is possible to build a road of any form quickly and without any troubles.

Pits arising from the subsidence of the soil can be just sprinkled, and many even like the rustle of gravel under the feet or tires of the car. But the gravel has no less flaws. Weeds can appear on the gravel path in North York and must be raked out frequently. Stones can fall on the lawn, so the gravel garden path is bound to a hard edging.

It is best to pave the ditch under the path with perforated polyethylene, pour a layer of large gravel 7-8 cm wide on it, tamper it with a layer of small gravel 3-5 cm on top and compact it with a roller until a hard surface is obtained.

The first step is to sketch out a plan for your site. The garden design in North York should be based on the location of the house. Mark where there are already buildings (except for the country house, the territory is often a garage, summer kitchen or tool shed). And now it’s time to think about what you lack for a good rest. Pergola with a barbecue? A pond with goldfish? Plots with your favorite type of strawberry? Whatever the fantasy suggests, write it down and put it on the plan.

Note! The height of the plants on the plot should decrease from north to south. The beds are where it’s warmer. Trees – where the north is.

Designing and decorating your garden on your own will require patience, knowledge in many areas and considerable effort. In the excitement of design and a gust of inspiration do not forget about what you wanted to see on the site from the beginning. In the process it is very easy to get carried away and lose the main idea. In the end, instead of a cozy garden and a dream house, you risk the same chaos from the beds from which you started to remodel.

Landscape design of the yard

Sideways in the yard

The layout of the garden pathways in York is based on which parts of the garden need access.A successful solution is to route past the parts of the plot that look most attractive. There must be an easy path to beds and flowerbeds (if you have saved them). Please note that the main lanes should be smooth, without steep turns.

There is not as much room on the country estate as you would like. But even with the conditional tightness of the width of the track should be chosen taking into account the fact that it should be free to “diverge” two people. The width of 1-1.5 meters is considered optimal.

The garden path in North York should have a slight slope on both sides – then no puddles will form on it. In addition, the rainwater from the path will additionally water the nearby flowerbeds and wash away dust from the path itself.

The material for the garden path in East York must be temperature-resistant, robust and aesthetically pleasing. Most often concrete, stone or decorative tiles are used for the decoration of the garden paths in York. A more natural variant – paths sprinkled with sand or gravel. Mosaic paths in North York made of pebbles look very attractive.

Yard lighting in North York

Landscape design has received less attention than interior design. What can we say about the lighting of a site in North York, if the interior design of the site is not always remembered? With the right lighting, the site may look more interesting in the evenings than in the daytime.

We use functional lighting, but forget about decorative lighting. To illuminate path in York, the turns and buildings on the plot, diffuse soft light is sufficient, which allows you to move around the yard safely, but does not distract from watching the garden.

Recessed luminaires are ideal as functional lighting. They can be mounted along paths, at the edges of stairs and near railing. The main purpose is to serve as “guide lights”, without dazzling or irritating the eyes. You can also use the lights on the posts – if you are not confused by the fact that in the daytime around the garden paths will be visible “fence”. The “posts” are available in every possible style, so even a technical lighting element can be used to maintain the general mood of the space.

Thanks to the decorative lighting in East York, you can create all the advantages of a site by highlighting individual trees or by illuminating flowerbeds.

Ground mini spotlights are usually used to illuminate bushes, trees or ornamental elements. They can provide not just a warm or cool tone of illumination, but illuminate the area with any color – thanks to filters on the glass.

Lighting features:

luminaires need less power than in the city
energy-saving lamps
it is desirable to provide for the possibility of separate switching of technical and decorative lighting
the power cable for the backlight must be well insulated – so that you do not accidentally damage it during garden work

Garden figurines. Landscape design in North York

Garden figures in North York of animals and mythical characters are very popular in the West, where each of the characters has its own story. You can set any decor on the site. The main thing is that it does not look like a “foreign body” and matches the style of the house and garden. Garden dwarfs in East York are more likely to hide in the bushes, and the forest fairy should live by the tree. Think of a fairy tale about how an Easter hare or dragon got into your garden.

Landscape design in North York of the garden area

Tall plants are better placed on the north side. The middle strip of the plot is led along the shrubbery. If you have decided to keep a few tomato and salad pepper beds, these plants are best suited to sufficient light, on the south side of the garden garden.

All typical country gardens are planned in a regular style. Pitches, greenhouses and even rows of trees are arranged in geometric order.

The landscape design in North York of the garden area in East York suggests a more natural and natural arrangement of trees and flowers. Particular attention is paid to the nuances of the relief. If there is a hump on a country house plot, it is not necessary to level it. Try to beat the composition that nature has already created for you.

image-Landscape-design-of-the-garden-area

Alpine Hill

The Alpine hill in East York is a small piece of real mountains created by your hands. A simple heap of stones with some flowers stuck between them is not yet an Alpine hill in North York. This decoration is not as easy to create as it seems. Before you start to realize the composition, it is not superfluous to plan it on paper. The real hill has peaks and cliffs, a flat plateau and a green valley.

The arrangement of the slide starts in autumn. The first layer is gravel or broken brick, over which the earth mixture is poured (of course, the slide). The approximate height is about a meter (later, when the earth “sits”, the slide will be slightly lower).

After shrinking into the hill, large stones are mounted (they are up to half buried in the ground). On top of the hill there are medium and small elements. The choice of plants for the slide depends not only on their soil requirements and lighting, but also on the overall style of the site. But first of all, you should pay attention to flowers and herbs, which do not need complex care.

Landscape design in North York

The Japanese, suffering from lack of free space, perceive nature as a gift from above. They “see a huge world in small things” and try to make their garden perfect. Why don’t we follow their example? In our time, man is surrounded by a mass of everything artificial and fake. That is why it is crucial not to lose touch with nature, to remain united with it. To have, even if it is very small, but its own territory, where you can relax, relax and recover after a busy day at work. This is why the landscaping of the site in York is of concern to many.

Landscape design in North York is a subtle art, which allows you to turn an ordinary piece of land into a real paradise with its character and personality, filled with special calm and harmony. To comprehend all the subtleties of landscape design of the plot in York, making it beautiful and comfortable, under the power of everyone. It is enough just your desire and necessary information that you can always find in this section.

Here you will learn about different styles of landscape architecture and examples of different solutions to landscape design in North York. You will be able to discuss such issues as vertical landscaping and design, arrangement of flower gardens, ponds, fountains, lawns and everything else related to landscaping and landscaping. Articles from this section will help to facilitate your work and cope with the difficult task – the design of a site in East York.

Very soon in the section will appear new subsections: “Water structures”, “Garden ornamental elements”, “Roads in the garden”, etc. In them you will find all the information you need to create not only a beautiful garden, flower bed and properly arrange an alpine hill in York, but also various garden decorations, real works of garden art.

You will get a lot of non-standard ideas, appreciate the work of other users and, of course, get the necessary expert advice to make a garden plot in East York unique. You can share useful information with others, telling about your victories and failures, achievements and landscaping options for the East York area. This will help other users of the site to avoid stupid mistakes in the arrangement of the plot. And their advice, in turn, will help you.

Creating a unique design of a plot of country house in York – it is certainly a difficult multistage process. But sharing with each other the necessary information and secrets, prompting each other and advising, you will undoubtedly be able to create high-quality and beautiful landscaping in York. And we will definitely help you in this!

Landscape design in North York of the area

It is good to have a favorite summer cottage, where you can relax from the monotonous weekdays, get some fresh air, and sometimes live for a while. Landscape in York in many ways determines the character of the owner.

In order to competently design and implement the design of the landscape in North York , you can call specialists with years of experience. But it is much more pleasant (and cheaper) to create a landscape of cottage houses in East York with their own hands.

Of course, it takes a lot of effort, some knowledge and skills, but the result will please any owner, because doing something with their own hands, you put a piece of your soul.

How to create a landscape design in North York with your own hands, where to start, what accents to place – about everything in this article, with numerous photos and useful recommendations.

Determination of cottage landscape type

Before you start designing, you need to find out which site you will have to work with. To do this, you need to come to the cottage and look around carefully. Especially important this stage for new sites, the owners of which are still unfamiliar with the features and properties of the cottage landscape in North York.

So, the determining factors in choosing the landscape of the cottage will be:

the location of the cottage area, its orientation on the sides of the world;
the character and style of the existing buildings in the cottage (both the main house and small farm buildings);
illumination of the cottage plot;
soil type on the plot;
the topography of the area (plain, slope, close proximity to a natural pond, forest, etc.);
the presence of a fence between neighbouring summer houses.

Having determined the landscape type in the countryside, you can proceed to the following point.

Designing on a holiday plot

As with any construction, the creation of a landscape at the cottage requires preliminary preparation – a plan.

To make a plan, you can use one of the many computer programs. Modern technology allows only by entering the parameters of the dacha site, get the most optimal landscape design in North York. In this case, you can get a three-dimensional image of the future landscape of the summer cottage and finally decide whether you like this project or look for another.

If there is no desire or possibility to work with programs-robots, it is possible to sketch the scheme of a country landscape the hands. This requires a plan of the cottage area itself and the existing buildings on it.

The existing cottage plan is transferred to millimeter paper, observing the scale, and then they start drawing of separate landscape elements.

Landscaping Details

To date, many elements have been invented to decorate the landscape of the cottage and the adjacent territory, make them as functional and expressive as possible.

Among other things, such details of the dacha landscape stand out the most:

Small architectural structures. These are garages, sheds, summer showers, baths and much more. The main requirement for such summer houses is that they must be executed in the same style as the dwelling house, correspond to the landscape design in North York. Today in fashion a combination of incongruous and a mixture of styles, but such work is better to entrust professionals, as it is very easy to “overdo”. Maintaining a uniform style of the landscape of the cottage, it is easy to achieve naturalness and naturalness. So, if the house is built of wood, brick buildings will look ridiculous against its background. But the stone cottage is quite suitable for a bath from a log cabin. Another rule – the buildings must have interesting architecture, because the garden is beautiful only in summer, in winter the eyes of all guests to the cottage will be chained to the buildings.
Landscape zoning should be performed based on the initial configuration. Thus, the square cottages are more suitable for dividing into equal square zones, it is better to divide the elongated area into rectangles of different sizes with a particular landscape.
Fences and fences also play a rather large role in the design of the landscape design in North York of the cottage. As a rule, fences between neighboring dachas are not included in the landscape definition. Here decorative fences in York are taken into account, which help to divide a cottage into thematic areas such as garden, garden, recreation area, playground, parking space, etc. These fences do not perform the function of protection of the cottage from prying eyes or strong wind, their purpose – to complement the landscape design in North York, to act as an additional decorative element.
Paths. Garden paths at the cottage can be of two types: geometric and arbitrary. The first option is more suitable for spacious country houses, the territory of which has the correct form of a square or rectangle. In the vast majority of cases, country houses have a polygonal complex shape and a small area. On such landscapes look more profitable curved, winding paths. So, there should be two types of paths: the main one, which connects the gate to the entrance to the house, and secondary paths that connect the house with all the zones of the cottage plot.
Artificial structures in North York have a decorative function in landscape design. These include alpine slides, rockeries, patios and the pool area. All this is created by human hands, before building each of these elements it is necessary to make an individual plan with all sizes and small details.
Water reservoirs are also often a decoration of the summer house. Today in the landscape there are artificial ponds, rivers, streams, fountains and waterfalls. The combination of several of these constructions in one landscape is often used. When designing a reservoir in a summer house, one should not forget about water supply, electricity for pumps and filters, as well as drainage system.
Vegetation occupies almost the most important part in creating the landscape of the cottage. Successfully selected trees, shrubs, flowers and herbs can change any landscape beyond recognition. Planting in York and taking care of plants takes up most of your holiday time, so when choosing plants, you have to calculate your strength and time wisely. It is better for a busy person to plant perennial crops, shrubs and dwarf trees, unpretentious flowers adapted to the local climate.

Achievement of the set task

You can implement your plan on your own, too. Creating a landscape design for a summer house , as mentioned above, should begin with the preparation of the project. You can choose a landscape project in North York by numerous photos and videos of already implemented landscapes, but it is much more interesting to come up with it yourself.

When a landscape project has been selected and a plan has been sketched out, you can start to implement the plan. First of all, they build dacha buildings: terrace, arbor or a barbecue. Without these constructions it is difficult to imagine the cottage as a place for rest.

During excavation of the foundation there may be extra land, sometimes there are large stones – do not prematurely get rid of them. All this can become a building material for a rockarium or alpine hill.

The next stage will be laying paths in the cottage. The simplest option is to mark the perimeter of the path, remove the soil to a depth of about 10 cm and fill the resulting void with large stones or paving tiles.

Outdoor paths can become a real decoration of the landscape, they are made of wood saws, covered with pebbles or gravel, using modern materials such as mosaics or ceramics.

After that, you can decorate the landscape of the cottage . At this stage stone gardens are laid out, fountains and ponds are made, pools are built. It is not customary to decorate the modern cottage landscape with animal figurines and dwarfs – this is already a passed stage. Today various flowerpots, statues, installations of interesting materials, original lamps are in fashion.

The stage of landscaping of the cottage is rightly considered the most interesting. But it is also the most important, because greenery can transform any cottage. For those who visit their country estate only on weekends, perennial plants, unpretentious flowers, trees and shrubs are more suitable.

Exotic bright flower-bearing plants usually require more careful care – they need regular watering, fertilising and replanting.

It is difficult to imagine a landscape of a summer house without a hedge. Evergreen plants, conifers and shrubs can be chosen as this element. The fence should be beautiful not only in summer, but also in autumn, winter. The condition of the hedge should be carefully monitored: watering, shearing, removing dryness.

You can choose your lawn as an intermediate landscaping for your summer house. Even grass looks spectacular on any plot and can be thinned out with interesting shrubs or bright flowers.

Flowerbeds can be planted on either side of the path leading to the house. It is better not to make them symmetrical; flower beds of different shapes and fillings look more original.

On the terrace, in the gazebo, by the pool look great vases and pots of flowers. The arbor will be decorated with wicker vines and cachepot with ampel plants.

Arrangement of the cottage plot with your own hands – not only a way to save money, but also a great option for relaxation and recreation from the city life.

Read our blog!

Without a fence on the plot, it not only protects your property, but also marks its borders. However, after the purchase of the plot and the construction of the house there is almost no money for a stone fence. And not everyone likes it. It’s okay, there is a great alternative – wood. Wooden fences in Toronto – The best solution for your home!

Types of wooden fences in Toronto

All existing wooden fences in Toronto are divided into two groups: light and heavy. The construction of the first group does not include a foundation. The spans there are supported by buried, hammered or concreted pipe posts, or even just wooden ones. Though even such simplicity does not allow to trample the basics of construction science. Despite the absence of the foundation, which we are used to in our understanding, the light fence posts should still be buried no less than the depth of the ground freezing. Otherwise they will be pushed out by the first frosts.

The advantages of lightweight structures include their cheapness, speed and ease of construction. It is possible to put such a fence on a site in just one day, and it is together with painting. The only, but chronic, disadvantage of these fences is short-lived. Corrosion and rotting processes are particularly active on the ground contact line of the fence.

Heavy fences in Toronto are quite a different matter. Layed out of brick or stone, or even cast out of concrete poles, will stand at least at home. True, such reliability will cost a round sum, but you always have to pay for quality.

A powerful strip foundation – a distinctive feature of all heavy fences. In the best traditions of house-building, it can be buried to the depth of freezing or cast by analogy with low-deepened tape. In the latter case, the ground under the foundation must be replaced by a non-soiling tape and the tape itself must be reinforced with reinforcement.

Of course, such a fence can only be called wooden fence conditionally, as lumber plays no key role here, and can easily be replaced, for example, with an artistic forging. On the other hand, it is a combination of light wood and heavy stone that really looks beautiful.

No matter what type of fence you choose, light or heavy, you still have to decide on the technique of filling the spans. It will determine the face of your plot.

Classic fence in Toronto

The easiest way to tightly sew the spans with planks. Such a wall looks reliable, and protects the area from unnecessarily curious glances. But that’s on one hand. And on the other hand – the production of such a fence will require a lot of quality lumber, which can be spent on more interesting projects.

Stack fence in Toronto

Opposite to the classic fence can be a stacker. It certainly does not radiate as much reliability as the above mentioned one, but is it so important today? But a stack fence in Toronto and in the manufacture of cheaper, and the beauty of your site will not overshadow, and, most importantly, will allow to implement the original design ideas.

Cloth fence in Toronto

Very diverse design can have wooden fences in Toronto, included in the conventional group “wicker”. There is a solid Austrian fence, and more than a budget paling. You can weave anything from a thin willow tree rod to a planed board. The main thing is to do the work with your soul!

Grid

Not a bad way to stand out would be a fence in the form of a wooden grid. For such fences, planed wooden laths are most often used, but some craftsmen successfully replace them with rods or even branches.

Read our blog!

Choosing a Tile Paving in Toronto. Scheme

Preparation works on the territory before stone paving

Framing installation

Tile laying

Tags Cloud

Basic rules for installation and maintenance of paving tiles in Toronto

Ways to Care for Paving Tiles

How to properly clear paving tiles in winter from ice and snow.

Paving tile care in the summertime

How to remove the pickles from the pavement tiles

How to get rid of the grass between the pavement tiles

Tags Cloud

Methods of installation of a Stonework in Toronto – 2 variants

Stonework in Toronto : types of decorative material – sandstone, marble, limestone

Installation of a stonework in Toronto

Tags Cloud

Important indicators that the best landscaping company in East York is taking into account

Several key milestones in the best landscaping company in York

Landscape design in East York

Landscape work in York

One of the most interesting and important stages of landscaping is landscape work in York.

Almost every landscape designer in North York has his or her own techniques and secrets for creating a beautiful garden.

Landscape design companies in North York

Our landscaping company in East York is your dream!

Tags Cloud

Yard design in Brampton

Modern Patio in Brampton

Are landscaping companies essential in Ontario

Original yard design of a private house in Brampton: a recreation area or a garden.

Landscaping near me Brampton

Tags Cloud

Build a veranda in Bolton

Tools and materials for veranda construction in Vaughan

Preparing to build in Aurora

Tags Cloud

Necessary details for a landscaping in Ontario

Custom types of sites – advice from a landscaping in Ontario

Landscape design in Ontario

Tags Cloud

Driveways in East York

Construction of a garden path

Material for garden paths. Garden path made of bricks in North York

Stone garden path in York

Garden path made of asphalt in East York

Cobblestone garden path in North York

Garden path: a mosaic in North York

Garden path made of wood and bark in East York

Concrete garden path in North York. Concrete driveways in North York

Garden path made of gravel , gravel driveways In East York

Tags Cloud

Landscape design of the yard

Sideways in the yard

Yard lighting in North York

Garden figurines. Landscape design in North York

Landscape design in North York of the garden area

Alpine Hill

Landscape design in North York

Landscape design in North York of the area

Determination of cottage landscape type

Designing on a holiday plot

Landscaping Details

Achievement of the set task

Tags Cloud

Types of wooden fences in Toronto

Classic fence in Toronto

Stack fence in Toronto

Cloth fence in Toronto

Tags Cloud

CONTACT US TODAY for a Free Estimate!

CONTACT US TODAY
for a Free Estimate!